ProductsAbout TJEPServiceEventsNewsMediabankContact

TJEP FH 21/90 LW framing nailer

TJEP FH 21/90 LW framing nailer
Item no. 100098
EAN no. 5702551000984
Type Pneumatic Nailer
Size (LxWxH) 540.4 x 121 x 335.3 mm
Weight 3.30 kg
Air consumption per cycle 3.0 litres
Length 50 - 90 mm
Diameter 2.9 - 3.1 mm
Angle 21°
Used for
Raftering, Raftering, Shuttering, Plywood, Valley gutters, Laths, Chipboard, Fascia boars - wood, Battens, Eaves

Good allround 21° strip nailer for roof battening, siding, decking, boarding etc.

Key product features

  • Easy change from single shot to bump fire
  • Rafter/belt hook
  • Adjustable air exhaust
  • Rear two-step loading
  • Adjustable depth control

Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Recommended when using 2 nailer
TJEP 20/25-2 compressorTJEP 20/25-2 compressor
Item no. 123021
EAN no. 5702551230213
Only recommended for low speed (approx. 20 shots per minute)
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442

See the manuals online here:
iPaper Manual
iPaper Safety instruction
Did you know that TJEP was established in 1964?