ProductsAbout TJEPServiceEventsNewsMediabankContact

TJEP KA-1L anchor nailer

TJEP KA-1L anchor nailer
Item no. 100323
EAN no. 5702551003237
Type Pneumatic Nailer
Size (L×W×H) 438 × 112 × 255 mm
Weight 2.04 kg
Air consumption per cycle 3.0 litres
Length 40 - 50 mm
Diameter 4.0 mm
Angle 34°
Used for
Wind drag strip, Metal connector plates

Specially developed for metal connector plates, with many features increasing user-friendliness and safety.

Similar to KA 1 but with a long magazine.

Key product features

  • Twice as many shots per load
  • Takes two strips of nails
  • User-friendly - just push the nose of the tool against the workpiece
  • Drives the nail in with several short punches
  • Higher safety - no risk of ricochets

Remember daily oiling with nailer oil.

Item no.ProductFinish
837140 TJEP KA 40/40 anchor nails
Galv. 12µ+
837150 TJEP KA 40/50 anchor nails
Galv. 12µ+
837040 TJEP KA 40/40 anchor nails
837340 TJEP KA 40/40 anchor nails
Stainless A4

Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Recommended when using 1 nailer
TJEP 20/25-2 compressorTJEP 20/25-2 compressor
Item no. 123021
EAN no. 5702551230213
Only recommended for low speed (approx. 20 shots per minute)
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442

See the manuals online here:
iPaper Manual
iPaper Technical data
Did you know that TJEP was established in 1964?