ProductsAbout TJEPServiceEventsNewsMediabankContact

TJEP KA-2 anchor nailer

TJEP KA-2 anchor nailer
Item no. 100329
EAN no. 5702551003299
Type Pneumatic Nailer
Size (L×W×H) 287 × 118 × 279 mm
Weight 2.36 kg
Air consumption per cycle 4.6 litres
Length 40 - 60 mm
Diameter 4.0 mm
Angle 34°
Used for
Metal connector plates, Wind drag strip

Latest generation of the customised anchor nailer for metal connector plates - up to 60 mm metal connector nails.

Key product features

  • Light and handy
  • Drives the nail in with short punches
  • No risk of ricochets
  • Shock-absorbing rubber handle
  • Extra wide rubber edge

Remember daily oiling with TJEP Lubricant

Item no.ProductFinish
837140 TJEP KA 40/40 anchor nails
Galv. 12µ+
837150 TJEP KA 40/50 anchor nails
Galv. 12µ+
837160 TJEP KA 40/60 anchor nails
Galv. 12µ+
837040 TJEP KA 40/40 anchor nails
837340 TJEP KA 40/40 anchor nails
Stainless A4

Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Only recommended for low speed (approx. 20 shots per minute)
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442

See the manuals online here:
iPaper Manual
iPaper Safety instruction
Did you know that TJEP fuel cells also fit Paslode Impulse products?