TJEP MF-14/150 stapler [DISCONTINUED]
| Specifications | |
| Item no. | 100688 |
| EAN no. | 5702551006887 |
| Type | Pneumatic Nailer |
| Size (L×W×H) | 400 × 138 × 470 mm |
| Weight | 6.25 kg |
| Air consumption per cycle | 4.4 litres |
 | |
| Fasteners | |
| Length | 65 - 150 mm |
| Width | 27 mm |
| Diameter | 2.0 × 1.8 mm |
| Used for Insulation | |
| Item no. | Product | Finish |
|---|---|---|
| 841876 | TJEP MF-14 staples 75 mm, with glue | Stainless A2 |
| 841891 | TJEP MF-14 staples 100 mm, with glue | Stainless A2 |
| 841898 | TJEP MF-14 staples 130 mm, with glue | Stainless A2 |
| 841899 | TJEP MF-14 staples 150 mm, with glue | Stainless A2 |
| Item no. | Product |
|---|---|
| 106075 | TJEP Hybrid hose, 3/8" - 10 meters |
| 106077 | TJEP Hybrid hose, 3/8" - 20 meters |
| 106095 | TJEP air hose, 8/14 mm poly with nipple and coupling |
| 106096 | TJEP hose reel, 8/14 mm poly with nipple and coupling |
| 106228 | TJEP All season oil |
| 876403 | Driver unit |
Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.
| Recommended when using 1 nailer | |
|---|---|
 | TJEP 20/25-2 compressor Item no. 123021 EAN no. 5702551230213 |
| Only recommended for low speed (approx. 20 shots per minute) | |
 | TJEP 10/250-1 compressor Item no. 123044 EAN no. 5702551230442 [DISCONTINUED] |
| See the manuals online here: |
|---|
 Manual |
| Safety and operation instructions |
Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Denmark
Tel. +45 97 14 14 40
