TJEP 20/25-2 compressor
| Specifications | |
| Item no. | 123021 |
| EAN no. | 5702551230213 |
| Size (L×W×H) | 520 × 430 × 790 mm |
| Weight | 40 kg |
| Cylinders | 2 |
| Horsepower | 1.8 kW / 2.5 HP |
| Power supply | 230 volt |
| Max pressure | 10.5 bar / 152 psi |
| FAD @ 0 bar* | 250 litres/min |
| FAD @ 2.8 bar | 180 litres/min |
| FAD @ 6.2 bar | 153 litres/min |
| Tank | 20 litres |
| Noise (LpA, 4m) | 70 dB |
| Noise (LwA) | 95 dB |
| *Often referred to as "effective air" | |
TJEP introduces our new compressor, specially developed for handling larger construction tasks.
Key product features
- Starts at 8.5 bars – ends at 10.5 bars (cut in / cut out)
- 7,8 Amp
- 1,450 rpm
- Oil free
- Water separator
- Reduction valve
Do not use extension cables or use only a strong extension cable
Regardless of the compressor type, it is extremely important to use a separate fuse
group. If the compressor will not start, the cause is usually too low a voltage, due to
an extension cable that is too long/thin, other consumers on the same fuse or a cable
reel that is not fully unwound.
We recommend at least the following:
- Extension cables up to 10 m → 3 x 1.5 mm²
- Extension cables up to 20 m → 3 x 2.5 mm²
- Min. 13A dedicated fuse or 400V/230V adapter
| Item no. | Product | Finish |
|---|
| See the manuals online here: |
|---|
 Part list |
TJEP and UM KGK compressors
Compressors in need of repair must be returned to the dealer or sent, freight paid, to:
KGK A/S
Møllevej 9, H2
DK-2990 Nivå
Phone: +45 45 76 17 00
Please do not send compressors to UNIMERCO FASTENING – that will only prolong repair time and involve additional freight costs, since the compressor must be sent on to Nivå.
Thus, if you send a compressor to UNIMERCO FASTENING in Sunds, it will be forwarded to KGK, and there will be a surcharge covering additional freight from Sunds to Nivå.
Warranty repairs are returned carriage-free.
Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Denmark
Tel. +45 97 14 14 40
