TJEP 20/30-2 compressor
|Size (L×W×H)||520 × 430 × 790 mm|
|Horsepower||2.2 kW / 3 HP|
|Power supply||230 volt|
|Max pressure||10.5 bar / 152 psi|
|FAD @ 0 bar*||360 litres/min|
|FAD @ 2.8 bar||248 litres/min|
|FAD @ 6.2 bar||211 litres/min|
|Noise (LpA, 4m)||72 dB|
|Noise (LwA)||95 dB|
|*Often referred to as "effective air"|
Highly reliable and durable compressor.
Newly developed engine (2.850 rpm) with large
Performance ensures fast air compression.
Do not use extension cables or use only a strong extension cable
Regardless of the compressor type, it is extremely important to use a separate fuse
group. If the compressor will not start, the cause is usually too low a voltage, due to
an extension cable that is too long/thin, other consumers on the same fuse or a cable
reel that is not fully unwound.
We recommend at least the following:
- Extension cables up to 10 m → 3 x 1.5 mm²
- Extension cables up to 20 m → 3 x 2.5 mm²
- Min. 13A dedicated fuse or 400V/230V adapter
TJEP and UM KGK compressors
Compressors in need of repair must be returned to the dealer or sent, freight paid, to:
Møllevej 9, H2
Phone: +45 45 76 17 00
Please do not send compressors to UNIMERCO FASTENING – that will only prolong repair time and involve additional freight costs, since the compressor must be sent on to Nivå.
Thus, if you send a compressor to UNIMERCO FASTENING in Sunds, it will be forwarded to KGK, and there will be a surcharge covering additional freight from Sunds to Nivå.
Warranty repairs are returned carriage-free.
Kyocera Unimerco Fastening A/S
Tel. +45 97 14 14 40