ProductsNewsEventsService Technical guidanceContact

TJEP PC-90 coil nailer

TJEP PC-90 coil nailer
Item no. 100057
EAN no. 5702551000571
Type Pneumatic Nailer
Size (L×W×H) 311 × 132 × 357 mm
Weight 3 kg
Air consumption per cycle 2.9 litres
Length 45 - 90 mm
Diameter 2.5 - 3.8 mm
Angle 15°
Used for
Shuttering, Hardieplank, Ivarplank Cedral, Outside siding

Nailing of outside siding, panelling, pallets, boarding, decking etc.

Coil nailer for siding up to 90 mm ring shank nails etc.

Key product features

  • Single shot / bump fire
  • Adjustment of magazine height
  • Adjustable depth control
  • No-mark nose
  • Rafter/belt hook
  • Plastic protection cap

Can also be used with CN nails

Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Recommended when using 1 nailer
TJEP 20/25-2 compressorTJEP 20/25-2 compressor
Item no. 123021
EAN no. 5702551230213
TJEP 20/30-2 compressorTJEP 20/30-2 compressor
Item no. 123052
EAN no. 5702551230527
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442
Only recommended for low speed (approx. 20 shots per minute)
TJEP 6/10-2 Silent compressorTJEP 6/10-2 Silent compressor
Item no. 123026
EAN no. 5702551230268

See the manuals online here:
iPaper Manual
iPaper Safety instruction

Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Tel. +45 97 14 14 40

Did you know that TJEP fuel cells also fit Paslode Impulse products?